Effect of Heat Treatments on the Thermomechanical Behaviour of Ni-Ti Superelastic Mini Coil Springs
Grassi Estephanie Nobre Dantas, de Oliveira Henrique Martinni Ramos, de Araujo Carlos José and 1 more
MATEC Web of Conferences · 2015
doi:10.1051/matecconf/20153303004 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Shape Memory Alloys are susceptible to annealing heat treatments, which are capable of partially or fully recover atomic mobility and, therefore, affect the overall thermomechanical response of the material. In this work, NiTi SMA orthodontic minicoil springs in superelastic state, widely commercialized, were submitted to annealing treatments as a way to modify their thermomechanical response and adapt it to the use in mechanical systems in other fields besides orthodontics. The main objective is to study the influence of temperature and time of annealing on the thermomechanical behaviour of the coil springs, originally superelastic at room temperature. Using a factorial design, three mechanical properties of interest were studied: spring constant, shear modulus and energy dissipation capacity. It was demonstrated that annealing in the range of 500°C-600°C is capable of converting superelastic springs to an apparently actuator state, as residual strain after loading/unloading at room temperature was observed, when a maximum 7% shear strain was attained in the cross section of the spring’s wire.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.