Deformation mechanism of cryorolled Fe-36%Ni strip steel
Li Changsheng, Zheng Jianjun, Song Yanlei and 2 more
MATEC Web of Conferences · 2015
doi:10.1051/matecconf/20152107012 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The deformation mechanism of cryogenic rolled Fe-36%Ni steel is investigated with rolling strain of ε = 0.24–0.92. Experimental results show that both dislocation slip and twinning are activated at cryogenic temperature as strain ε = 0.24, and the mean thickness of deformation twins is about 200 nm. When the rolling strain increases to 0.53, the mean thickness of deformation twins reduces to 50 nm and some curved deformation twins exists. As the rolling strain increases to 0.92, the thickness of deformation twins is no longer changed and the micro shear bands exist due to the concentration of work hardening, which suggests that twinning is activated at the early stage of cryogenic rolling (CR) process. It is assumed that more deformation twins will be fragmented by shear bands during the following CR. The dislocation slip becomes the dominated mechanism again during the following deformation. The mechanism of the Fe-36%Ni steel following CR was analyzed quantitatively.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.