Skip to content
naulon
Not checkedNot checked for notices yet.

Tailoring the grain structure of IN718 during selective electron beam melting

Körner Carolin, Helmer Harald, Bauereiß Andreas and 1 more

MATEC Web of Conferences · 2014

doi:10.1051/matecconf/20141408001 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Selective electron beam melting (SEBM) is an additive manufacturing method where complex parts are built from metal powders in layers of about 50 μm. SEBM works under vacuum conditions which results in a perfect protection of the metal alloy. The electron beam is used for heating (about 900 ∘C building temperature) and selective melting. The high beam velocities allow innovative scanning strategies in order to adapt the local solidification conditions which determine the epitaxial solidification process of IN718. We show how scanning strategies can be used either to produce a columnar grain structure with a high texture in building direction or a complete texture-free fine grained structure. Numerical simulations of the selective melting process are applied to reveal the fundamental mechanisms responsible for the completely different grain structures. In addition the influence of the different grain structures on the mechanical properties of IN718 is briefly discussed.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.