The use of Delfino digital signal controller in power inverter
Górecki Krzysztof
ITM Web of Conferences · 2019
doi:10.1051/itmconf/20192801017 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
This article analyzes the implementation of control algorithm for a single-phase power inverter using digital signal controller (DSC). For this purpose, a floating-point digital signal controller with a trigonometric math unit was used. The controller’s task was to control the H-bridge through a dedicated driver for power MOSFET transistors. For this task, transistors made in NexFET technology with low channel resistance were used. The H-bridge is the main power device of a single-phase, two-level power inverter powered by a 12V battery. As a modulation method, regular modulation with carrier signal using a triangular signal was used. The main aim was to show the digital signal controller’s performance in real-time control of power inverters and to present the maximum sampling frequency of the inverter that can be obtained for the example having been analyzed.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.