Study of the system responsivity to measure the blackbody's temperature by optical pyrometry from 1200 K to 1570 K
Abbane Saif, Ben Achour Zahra, Touayar Oualid
International Journal of Metrology and Quality Engineering · 2017
doi:10.1051/ijmqe/2016026 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
This work presents a method that has been recently adopted in our laboratory to determine the temperatures of blackbody sources in the range of 1200–1570 K. The system uses a Double Monochromator System (DMS) based on a grating and a prism as dispersion elements. The detection element was a silicon photodiode (Si-MMA), over which the spectral range from 800 nm to 900 nm has been used. Between the blackbody source and the DMS was placed an optical system consists of two convergent lenses. The system responsivity “G” was determined by the transmission factor of the optical system and the transmission factor of the DMS and the photodiode responsivity. The obtained results showed that the relative uncertainty of the system responsivity “G” varied from 0.3% to 1.12%. This in turn resulted in a corresponding uncertainty in temperature of about 2.2 K and 4.5 K (k = 1) over the evaluated temperature range. Although this uncertainty level was significantly high compared to those obtained by many other national metrology institutes, it was considered as a step forward in our laboratory to measure high temperatures.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.