Skip to content
naulon
Not checkedNot checked for notices yet.

Dosimetry data from fuel channel clips for benchmarking a new computational fluid dynamics model in neutron transport

Manahan Michael

EPJ Web of Conferences · 2023

doi:10.1051/epjconf/202327802001 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Accurate neutron transport models for BWRs are needed to characterize neutron damage to the top guide, top guide cylinder, vessel nozzles, and to other upper internals. In the past, neutron transport calculations above top-of-active-fuel (TAF) have had large uncertainties (well in excess of ± 20%) mainly due to the fact that the steam density distribution in that region is not well known. An advanced three-dimensional (3D) neutron transport model, which incorporates computational fluid dynamics (CFD) in the code suite, has been developed. Retrospective dosimetry measurements were made to benchmark the transport results. Six fuel channel clips were removed from the top of the fuel bundles, and small disk-shaped dosimetry samples were cut from the clips. The cuts were made through the Inconel spring and through the stainless steel clip body. The clips were selected from bundles that cover regions of low, intermediate, and high steam density. The average C/M ratio for the 10 dosimeters is 1.06. It has been shown that all of the calculated dosimeter activities fall within ± 20% of the measurement. This meets the criterion set by RG 1.190 [1] for acceptability of the calculations.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.