Skip to content
naulon

Not checkedNot checked for notices yet.

Design of air nozzle for air curtains

Žižkovsky Nikola, Drábek Armand

EPJ Web of Conferences · 2022

doi:10.1051/epjconf/202226901073 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The procedure, which is used in the design of the air nozzle intended to be used on air curtain, is described in this work. The present work is focused on the isolated flow of one air nozzle, while next work will continue with air nozzles constellation. Nozzle reach in the flow field is monitored with and without tangential flow simulating non-isothermal flow. Several basic shapes of nozzles with the same cross-section are evaluated. After searching the design space of the parametric CAD model simulated in isothermal flow – without tangential flow, the best configuration with the longest range were selected. From this smaller set of nozzles was selected one nozzle with the highest directional stability in non-isothermal flow field. The shape of the nozzle with minimal directional deviation in the non-isothermal flow is subsequently optimized by the adjoint method. This method makes it possible to further reduce the pressure loss in the distribution element by deforming the shape according to the local sensitivity of cost function on shape deformation. The final step of design process is to verify effect of modified nozzle on both isothermal and non-isothermal flow filed.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.