Skip to content
naulon

Not checkedNot checked for notices yet.

Design and Performance of Microwave Components for ECH and ECE Applications at General Atomics

Anderson James, Doane John, Moeller Charles and 5 more

EPJ Web of Conferences · 2019

doi:10.1051/epjconf/201920304001 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

This paper provides an overview of high power components for the application of Electron Cyclotron Heating transmission lines, and broadband devices for Electron Cyclotron Emission detection systems. The unique fabrication and assembly challenges are discussed, particularly in the context of ITER. The ITER ECH system will require robust, vacuum-compatible components such as polarizers, dummy loads, and switches that are sufficiently cooled to withstand 1 MW for 3,600 seconds. These elements, along with overmoded corrugated waveguide, are necessary to form transmission lines with efficiencies of 90%, and 90% transmitted HE11 mode purity. Recent high power test results are summarized and scaled from the 63.5 mm internal diameter design to the 50 mm diameter version that will be used for ITER. Elements designed for Electron Cyclotron Emission detection and reflectometry systems are discussed, such as frequency filters and polarization rotators. The large frequency operating range of corrugated waveguide is exploited for such applications. The application of additive manufacturing technology towards both low and high power components is considered as a promising new area of development.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.