Not checkedNot checked for notices yet.
Growth of Co2MnAl Thin Films by Pulsed Laser Deposition
Isber Samih, Skaff Nibelle, Roumie Mohamad and 1 more
EPJ Web of Conferences · 2014
doi:10.1051/epjconf/20147503008 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The effects of the deposition temperature and laser energy on the characteristics of Co2MnAl films deposited on GaAs substrates were investigated. The grown films were characterized by AFM for film roughness and surface topography. Film thickness and elemental composition were measured using Rutherford Back Scattering (RBS) technique, while crystalline structure and phase composition were investigated by XRD. The RBS measurements showed that the stochiometry of the films was satisfactory and very close to that of the target Co: 0.5, Mn: 0.25, Al: 0.25. The thickness of the films was found to increase as the laser energy was increased from 200 to 400 mJ, in particular for the films deposited at 400 °C. We also found an increase in the films thicknesses as the deposition temperature was increased for the samples grown at 200 and 300 mJ. The best film quality as deduced from XRD, RBS and AFM results for producing these single layers were those deposited at 600 °C with the laser energy at 300 mJ.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.