Skip to content
naulon
Not checkedNot checked for notices yet.

Ultrasonic detection of spall damage nucleation under low-velocity repeated impact

Watanabe T., Ito T., Murase K. and 1 more

EPJ Web of Conferences · 2012

doi:10.1051/epjconf/20122601046 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Repeated plate impact testing with impact stress well below the threshold spall-stress (2.6 GPa) on medium carbon steel was carried out to the identical target plate by impacting the flyer plate. Occurrence of spall damage under low-velocity repeated impact was evaluated nondestructively with a low frequency scanning acoustic microscope. We observed the spall damage distribution by the B- and C-scan images. In order to initiate the spall damage (voids in a ductile material or cracks in a brittle one) the particular value of threshold spall-stress should be exceeded what already belongs to a commonly accepted knowledge. Generally, the spall damage development is dependent on the amplitude and the duration of the stress pulse. If the stress is high and duration is long enough to create tensile failure of material, the voids or cracks nucleate along the spall plane, and consequently, they form macrocracks. Therefore, the spall damage does not create when the first impact stress is less than the threshold spall-stress. However, after the fifth low-velocity repeated impact test, the generation of the spall damage was detected, even if the impact stress (1.1–1.7 GPa) was lower than the threshold spall-stress (2.6 GPa).

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.