Simple FCS-MPC Method for Reducing Common-Mode Voltage in a Three-Phase Two-Level Voltage Source Inverter
Abdelaziz Fatima, Azzouz Zin-Eddine, Omari Abdelhafid
E3S Web of Conferences · 2022
doi:10.1051/e3sconf/202235302003 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Common mode voltage (CMV) causes various issues, including a negative impact on the performance of a hybrid electric vehicle’s power system (HEV). Many papers have published methods that mitigate CMV, almost all of which attempt to avoid zero vectors, but this increases total harmonic distortion (THD). This work describes a simple and efficient method for reducing CMV in a two-level three-phase voltage source inverter (VSI) with an RL load. This method uses only active vectors. It replace the zero vector with the two opposite vectors V2 and V5. for T1 and T2 respectively in a one sampling period Ts. A numerical simulation, using Matlab-Simulink. is achieved to assess the effectiveness of the proposed control technique. The obtained results show a reduction in THD value (17% improvement) and a decrease in the peak value of CMV from (${{ + {V_{dc}}} \over 2}$+Vdc2 and ${{ - {V_{dc}}} \over 6}$−Vdc6) to $\pm {{{V_{dc}}} \over 6}$±Vdc6. These results are compared to those obtained by using the traditional predictive control model MPC.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.