Not checkedNot checked for notices yet.
Meat Cutting Machine Shaft Design and Analysis
Cipto Cipto, Rahangmetan Klemens A., Wullur Christian Wely and 2 more
E3S Web of Conferences · 2021
doi:10.1051/e3sconf/202132807003 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
This study analyzes the maximum load on the shaft construction with a diameter of 12 mm and a length of 581 mm. The shaft is designed as a shaft for cutting meat with a capacity of 5 kg. The analysis was performed using the finite element analysis method included in the Autodesk software. According to mathematical calculations, the shaft is considered safe because the value of the admissible tension τa = 7.380 kg / mm2 is greater than the maximum tension τp 5.62 kg / mm2. Based on the simulation results of the test, the shaft experiences a maximum off-stress of 61.89 MPa, a maximum displacement of 0.07715 mm,, and a safety factor of 3.34 µl so that the shaft is classified as safe for use with a Load capacity of 5 Kg
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.