Skip to content
naulon

Not checkedNot checked for notices yet.

Sustainable operation analysis of the mining industry power supply system

Klyuev Roman, Tekiev Marat, Silaev Vadim and 2 more

E3S Web of Conferences · 2021

doi:10.1051/e3sconf/202132600016 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The paper presents an analysis of operating currents and torques during self-starting of motors with a voltage of 6 kV for cases of short circuit in the head feeders from the main step-down substation and in the feeders to the most distant substations of mining enterprises. For the network under consideration, the characteristic modes are: short circuit on the buses of shop substations. For the mining industry when selfstarting asynchronous motors with a squirrel-cage rotor and synchronous motors with asynchronous startup, the current multiplicity will be determined by the duration of the power failure (run-down duration). It has been established that the acceleration of motors during self-start will be somewhat slower than the usual start, since self-start begins at a speed of 0.89–0.94 of the synchronous speed and a resistance torque is equal to 0.65–0.75 of the maximum motor torque. The self-starting time of the motors is from 9 s to 42 s. To ensure self-starting conditions in the most severe modes in mountain conditions, it is necessary to make changes to the protection settings presented in the work.

Abstract licence: CC BY

References10

    10 more references, whose wording the paper’s licence keeps private.

    Reads

    Read by people on this page

    None yet.

    Checked or read by AI through naulon

    None yet.

    A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

    Are you an author?

    Is this your paper?

    Claim it to add your note and be paid when agents cite it. Free.