Skip to content
naulon

Not checkedNot checked for notices yet.

Analysis of Support Systems and Excavation Methods Based on Rock Mass Quality in the Intake Tunnel of the Jlantah Dam

Putera Doni Apriadi, Hendrayana Heru, Setiawan Hendy

E3S Web of Conferences · 2021

doi:10.1051/e3sconf/202132502009 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Research on the classification of rock mass quality in the intake tunnel Jlantah dam has not been carried out in detail because the research focuses on the location of the main dam so that empirical excavation methods and support systems have not been carried out. The rock mass quality will be used as a parameter in determining the excavation method and tunnel support system that will be used in the Jlantah Dam intake tunnel. The investigation was carried out through engineering geological mapping, core drill evaluation, and supported by laboratory test data based on the Rock Mass Rating (RMR) and Q-system rock mass classification. The rock mass at the research location based on the RMR classification is in class IV (poor rock). Based on the Q-system method, a very poor rock class is obtained. Based on the analysis of the RMR and Q-system methods, the suitable support system for engineering geological conditions such as the intake tunnel of the Jlantah Dam is shotcrete 10 cm thick, steel set with a distance of 1.5 m and rockbolt length of 1.6 m with a distance of 1.5 m. The proper excavation method for the tunnel intake is top heading and bench.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.