Skip to content
naulon

Not checkedNot checked for notices yet.

Generation of compressed air by cascaded thermocompressors – project status

Fischer Fabian, Kühl Hans-Detlev

E3S Web of Conferences · 2021

doi:10.1051/e3sconf/202131304003 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Compressed air is one of the most widely used industrial energy sources, and its production by mechanical compressors is extremely expensive and, in addition, inefficient. Therefore, the utilization of waste heat, which accrues on a large scale in many industrial applications, by means of a thermocompressor is an obvious alternative. This contribution presents a design approach to experimentally investigate a reciprocating thermocompressor with a self-actuated overdriven free displacer. These experiments shall be the basis for the design and realization of a cascade of identical stages, which has so far only been investigated by means of analytical modelling and theoretical similarity considerations. The main advantage of this approach is its extreme constructive simplicity and the expected self-regulating effect, which both facilitate a cost-effective production and operation. As the minimization of dead volume and fluid friction losses is essential, the heat exchangers and the regenerator are plainly realized by an annular gap around the displacer in the proposed design, thus further increasing its simplicity. The design parameters are determined by an optimization based on an analytical model extended by various losses and heat transfer limitations.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.