Skip to content
naulon

Not checkedNot checked for notices yet.

Discussion On The Optimization of Circumferential Distance Of The System Bolt In A Highway Tunnel

Wang Kun, Yu Shun, Pan Yong and 1 more

E3S Web of Conferences · 2021

doi:10.1051/e3sconf/202127202013 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The setting of circumferential distance of system anchor rod in highway tunnel is related to the safety of tunnel structure, and also affects the project cost. The “code for design of highway tunnels” issued in 2018 also adjusted the circumferential spacing arrangement of the system bolts of the tunnel. Based on a highway tunnel project, the circumferential spacing of system bolts in deep buried section of grade V surrounding rock is adjusted from 0.8m to 1.2m, and the numerical simulation and comparative analysis before and after the optimization of bolt spacing are carried out. The field monitoring and measurement data show that the surrounding rock deformation after adjustment has little effect, and the cavern is stable as a whole, which can guide the optimization implementation of subsequent sections.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.