Skip to content
naulon

Not checkedNot checked for notices yet.

Development of finite element models of gas forming process of Ti alloys structures

Savinkova K.J., Sobolev Ya.A.

E3S Web of Conferences · 2021

doi:10.1051/e3sconf/202126609004 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The use of combined technology of gas forming and solid-phase pressure bonding for manufacturing large-diameter torus billets with diameter up to 1500 mm, wall thickness up to 8 mm, and diameter in cross-section up to 400 mm from titanium alloys for manufacturing of pipeline bends of desired size is shown. The technologymaes it possible to reduce production costs by increasing the productivity of the manufacturing process and applying new design and technological solutions. The possibility of using the SIMULIA Abaqus software package for modeling gas forming of titanium alloys in superplasticityconditions with non-uniform heating of the billets is considered. The method of combined thermo mechanical analysis (COUPLED TEMP-DISPLACEMENT) with inclusion of the creep effect was used.

Abstract licence: CC BY

References4

    4 more references, whose wording the paper’s licence keeps private.

    Reads

    Read by people on this page

    None yet.

    Checked or read by AI through naulon

    None yet.

    A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

    Are you an author?

    Is this your paper?

    Claim it to add your note and be paid when agents cite it. Free.