Skip to content
naulon

Not checkedNot checked for notices yet.

Laboratory experimental study on red mud geopolymer used as road subgrade materials

Qin Lusheng, Nie Qingke, Zhang Haiqing and 2 more

E3S Web of Conferences · 2021

doi:10.1051/e3sconf/202126102043 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Red mud is a strong alkaline waste discharged from the process of alumina extraction, which is harmful to the environment and its utilization rate is always low. One of the effective ways to utilize red mud is used as road subgrade material. In this paper, the industrial wastes including red mud, fly ash, slag, and desulfurized gypsum are used as basic raw materials to prepare subgrade filling materials. A series of laboratory tests, such as compaction test, California Bearing Ratio (CBR) test (soaked and non-soaked conditions) and permeability test, are carried out. The physical and mechanical properties, such as maximum dry density, optimum moisture content, CBR value, expansion, permeability coefficient and soaked strength loss rate, of the mixtures with different proportions, were studied. The results can provide reference for the selection of the best proportion scheme and promote the utilization of red mud in subgrade engineering.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.