Not checkedNot checked for notices yet.
Mould and Process of an Injection Molding Rejuvenation Technique for Cable Insulation Failure*
Yang XiaoJian, Zhao YongXiang, Wang JunGuo and 1 more
E3S Web of Conferences · 2021
doi:10.1051/e3sconf/202123501030 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Mould and process are developed for an injection molding rejuvenation technique of cable insulation failure. Disregard the traditional clue that repair does not expand original damage in size and space, a new rejuvenation technique, i.e. injection molding, is developed for restoring cable insulation failure. In this technique the uncertain damage in size and space was replaced by a standard eliminated size and space. In this way, an expanded original damage with certain size and space is firstly made around cable insulation failure section. But the damage situation was modified to a standard mode so that a mould technology can be well applied to filling the modified size and space. In addition, the bigger size and space is applied by mould for over-filling the modified size and space. Then a standard process should be constructed by the repair practices till the quality testing verifies that a successful rejuvenation is reached. Applied practice has verified the applicability and availability of the present technique.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.