Not checkedNot checked for notices yet.
Noise characteristic analysis and sound sources identification for rod–airfoil interaction using different subgrid-scale models
Yang Chenghao, Feng Heying, Peng Yehui
E3S Web of Conferences · 2021
doi:10.1051/e3sconf/202123304036 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Four subgrid-scale models based on large eddy simulation (LES), such as Smagorinsky–Lilly (SL), dynamic Smagorinsky–Lilly (DSL), wall-adapting local eddy-viscosity (WALE), and dynamic kinetic-energy transport (KET) were used and couple Ffowcs Williams–Hawkings equation to accurately analyze and identify the characteristics and position of the sound sources of rod–airfoil interaction. The results of four models were compared with experimental data. It was found that the DSL model was the optimal subgrid-scale model for the study of the interaction noise considering the calculation accuracy. Therefore, the DSL model was selected for analyzing and identifying the characteristics and location of the interaction noise source. During the calculation, solid and permeable data surfaces were used for acoustic integral surfaces. The results show that the impact of the quadrupole source is negligible at a low Mach number, and the dipole noise coming from the pressure fluctuations is dominant. Meanwhile, the dipole noise from the airfoil is louder than that from the rod; the leading edge of about 30% chord length of airfoil the is the main sound source of interference effect. Above results can provide guidance for research of blade-vortex interaction noise.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.