Influence of temperature and time factor on process of spraying of metallic powders in a plasma atomizer
Ermakov Sergey, Gyulikhandanov Evgeny, Petukhov Evgeny
E3S Web of Conferences · 2020
doi:10.1051/e3sconf/202022102003 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The development of additive technologies is hampered by the almost complete absence of domestic systems for the production of metal powders. A prototype installation of a plasma atomizer was developed and manufactured, which makes it possible to obtain low-tonnage batches of metal powders of various chemical compositions. However, when the technology was transferred from the laboratory to production, a number of additional issues arose associated with a decrease in the quality of commercial products as the time of continuous spraying increases. It was found that the reason for this is the formation of powder deposits on the walls of the spray chamber and the increase in its temperature. Using the method of mathematical modelling, the maximum permissible temperature of the walls of the spraying chamber was determined, ways of stabilizing the quality of the powder during industrial production were shown.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.