Not checkedNot checked for notices yet.
Bottom-hole pressure optimization when operating the well lateral horizontal hole
Faizullin Rinat, Miroshnichenko Sergey, Sultanov Ravil
E3S Web of Conferences · 2020
doi:10.1051/e3sconf/202021703008 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The problem of optimization of technological parameters as a way to improve the efficiency of oil deposit exploitation is considered in the paper. There are no standards for parameters of well bottom-hole pressure for exploitation of lateral horizontal holes. The paper presents the evaluation of optimum bottom-hole pressure at which it is advisable to exploit the deposit lateral horizontal hole with maximum “water-free” production rate. Following the calculations carried out and analysis of the graphs of additional oil and liquid production dependence on bottom-hole pressure, graphs of production dynamics and water encroachment, it was concluded that 3 groups of drilling (kickoff) of lateral holes (KLH) should be distinguished: with high forecasted starting water encroachment (>90%), average starting water encroachment (about 80%), and low starting water encroachment (about 20-50%). The distinguished 3 groups allow applying the differentiation of parameters, for which optimum bottom-hole pressure parameters for each drilling group were found.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.