Skip to content
naulon

Not checkedNot checked for notices yet.

The Influence of Temperature Impact on the Strength of Adhesion of Polyurethane Glue-foam with Masonry Products

Derkach Valery

E3S Web of Conferences · 2020

doi:10.1051/e3sconf/202021202006 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The use of masonry on glued polyurethane foam joints can significantly increase labor productivity in the construction of stone buildings. One of the factors restraining the introduction of polyurethane foam adhesive into the practice of construction of stone buildings is insufficient knowledge of the influence of temperature effects on the adhesion of adhesive-foam to masonry products. In order to obtain data on the adhesion strength of polyurethane joints with masonry products under temperature influences, 28 prototypes of masonry were tested, aged in laboratory conditions and also subjected to heating to 100ºC and 200ºC. Tests of masonry samples were carried out in accordance with STB EN 1052-5. Based on the experimental studies carried out and new data on the influence of temperature effects on the adhesion strength of polyurethane joints with masonry products were obtained.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.