Skip to content
naulon

Not checkedNot checked for notices yet.

Identifying thermo-mechanical induced microstructural changes

Zeinali Seyed Morteza, Abdelaziz Sherif L.

E3S Web of Conferences · 2020

doi:10.1051/e3sconf/202020509005 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Robust engineering of geomaterials for energy applications requires a clear understanding of the impacts of temperatures and pressures applied to the soil on their microstructures. Such understandings will facilitate better designs of new geomaterials and technologies via ensuring accurate assessments of the performance of the existing ones. In this study, we assess the changes in the microstructure—specific surface area and pore size distribution—of a saturated clay subjected to stress and temperature cycle. Clay specimens were subjected to the desired mechanical stresses and thermal cycles in a triaxial system. Then, the specimens were swiftly extracted from the triaxial, flush frozen in liquid nitrogen, then freeze-dried to preserve their microstructure. The preserved specimens were then used for specific surface area and pore size distribution assessments using nitrogen (N2)-gas adsorption and mercury intrusion porosimetry. The results established qualitative explanations of the expected microstructural changes in geomaterials under operational conditions, which facilitate the development of new geomaterials that can overcome such alternations.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.