Not checkedNot checked for notices yet.
Evaluation of cyclic efficiency of multilayer desiccant bed column
Sawardsuk Prueksa, Sripinyowanich Jongyingcharoen Jiraporn, Cheevitsopon Ekkapong
E3S Web of Conferences · 2020
doi:10.1051/e3sconf/202018704018 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The main objective was to evaluate cyclic efficiency of a multilayer desiccant bed column. The experimental setup consisted of an air humidifier unit, a heating unit for regeneration, and the desiccant bed column with 15 layers. An airflow rate of 2.4 m3/min with the humidity ratio of 20 g water/kg dry air was used in this study. The results showed that the highest dehumidification rate of 21 g water/min was found at the beginning of the dehumidification process. During the regeneration process, the highest regeneration rate was 39 g water/min when regenerating the desiccant at a temperature of 90°C. For cyclic operation process, the cyclic efficiencies were 11% and 7% at the regeneration temperatures of 70°C and 90°C, respectively. The cyclic efficiency was dependent on the regeneration temperature.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.