Skip to content
naulon

Not checkedNot checked for notices yet.

Water-spray washing technique as a purification process in the production of biodiesel

Limmun Warunee, Sansiribhan Sansanee

E3S Web of Conferences · 2020

doi:10.1051/e3sconf/202018703006 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

In order to meet the standards set for biodiesel after biodiesel production via transesterification, a purification process is necessary. For the purification process, the wet washing method is mostly recommended because it is well-known for its easy application and high efficiency. However, this method requires a large volume of water and takes a long time. Consequently, this study focuses on designing a washing machine that reduces the amount of water used and shortens the application time for the washing method. The spray washing technique, a type of the wet washing method, was used for this study with a focus on the following parameters: the volume of water to crude biodiesel, flow rate, and time. All conditions investigated in the basic standards of biodiesel. The pH value, density, and velocity were considered as the criteria to select the optimum conditions for the washing machine. The results indicated that a volume ratio of 0.8:1 (water:crude biodiesel) and a flow rate of 4 L/min for 0.5 min was the optimum condition of the water washing machine for biodiesel purification that meets the international biodiesel specifications.

Abstract licence: CC BY

References10

    10 more references, whose wording the paper’s licence keeps private.

    Reads

    Read by people on this page

    None yet.

    Checked or read by AI through naulon

    None yet.

    A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

    Are you an author?

    Is this your paper?

    Claim it to add your note and be paid when agents cite it. Free.