Skip to content
naulon
Not checkedNot checked for notices yet.

Experimental study on atomization characteristics of two common spiral channel pressure nozzles

Han Han, Wang Pengfei, Liu Ronghua and 3 more

E3S Web of Conferences · 2019

doi:10.1051/e3sconf/20198101022 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Spiral channel pressure nozzles are commonly used pressure nozzles in practical workplaces. In this paper, two kinds of spiral channel type pressure nozzles, namely, spiral hole type and spiral non-porous type, the atomization characteristics and dust reduction efficiency under different spray pressures are discussed and compared. Based on the experimental method, based on the self-designed spray dust-reducing roadway experimental platform, the macro-atomization characteristics of the two nozzles, namely the flow rate, the atomization angle, the range, and the droplet size, were measured. The following conclusions were drawn: (1) The flow rates of both nozzles increase with increasing spray pressure, and the flow coefficient of the spiral non-porous nozzle is small. (2) The change of the atomization angle of the two nozzles first increases and then decreases with the increase of the spray pressure, and the atomization angle of the spiral non-porous nozzle is larger. At the same time, the range of the two nozzles gradually increases as the spray pressure increases, and the range of the spiral perforated nozzle is always larger than that of the spiral non-porous nozzle. (3) When the spray pressure is gradually increased, the droplet size of the two nozzles selected in the experiment is gradually reduced, and the droplet size of the spiral perforated nozzle is always larger than that of the spiral non-porous nozzle before 5 MPa, and then gradually Become smaller. The main reason why the droplet size decreases with the increase of the spray pressure is that the increase of the spray pressure leads to an increase in the spray speed of the water droplets, so that the water droplets are completely split when they are ejected from the nozzle, resulting in a smaller droplet size. In summary, when the spray pressure required in the actual working environment is low, the use of a spiral non-porous nozzle is more conducive to dust reduction.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.