Skip to content
naulon

Not checkedNot checked for notices yet.

Providing resistance to sulfide stress corrosion cracking of pipelines welded joints by selection of welding parameters

Khudyakov Artem, Danilkin Pavel

E3S Web of Conferences · 2019

doi:10.1051/e3sconf/201912104005 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Sulfide stress cracking (SSC) is one of the most dangerous types of pipelines destruction. Thermal impact of the welding process drives to heterogeneity of the microstructure and properties of the metal, which can lead to cracking of pipeline welded joints. Resistance to SSC of welded joints is determined by the thermal cycle of welding and cooling rate in the temperature range of austenite transformation. Due to performed studies based on simulation of welding heating the recommended range of cooling rates of 10–30 ° C/s was established, in which the resistance to SSC of welded joints is ensured. To calculate the cooling rates in coarse grained heat affected zone (CGHAZ) finite-element models of heat distribution were developed for longitudinal multi-electrode submerged arc welding (SAW) and multi-pass girth welding of pipes. Using the developed welding models, it was found that in order to achieve the cooling rate in CGHAZ it is necessary to reduce heat input up to 15-30% during multi-electrode SAW process of longitudinal welds of pipes. For multi-pass girth welding it is necessary to preheat the edges to be welded up to 100-300 °C depending on type of welding (GMAW or SMAW) and pipe wall thickness.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.