Skip to content
naulon

Not checkedNot checked for notices yet.

How to compare energy performance requirements of Japanese and European office buildings

Ahmed Kaiser, Yoon Gyuyoung, Ukai Makiko and 1 more

E3S Web of Conferences · 2019

doi:10.1051/e3sconf/201911103038 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

This study applied the normalisation method that enabled to compare the energy performance of buildings from European and Japanese climates. A reference office building was simulated with national input data and weather file in order to estimate the thermal conductance of building model and heating degree-days for a reference climate. Based on simulated results, economic insulation thickness and thermal transmittance of windows for all climates were determined. A reference office building corresponding to Japanese ZEB Ready performance was moved with this method to Estonian and French climates. The results compared to national NZEB requirements and EC NZEB Nordic and Oceanic recommendations. It was found that the Japanese ZEB Ready building configuration with air source heat pump was very close to EC NZEB recommendations. However, in the case of district heating and gas-boiler heat sources, it was needed to improve Japanese ZEB Ready building configuration in order to meet EC NZEB recommendations. Estonian NZEB requirement met EC recommendation with both heat sources, but French NZEB requirement was much less ambitious.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.