Not checkedNot checked for notices yet.
Impact of roughness of discontinuities on the behaviour of jointed rock samples
Jarczyk Patrycja
E3S Web of Conferences · 2019
doi:10.1051/e3sconf/201910601006 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The subject of the publication is the behavior of rock samples faulted by individual discontinuities with different roughness under three-axial compression conditions, with confining pressures up to 30 MPa. Samples with discontinuities oriented at angles of 30°, 45° and 60° in relation to the directions of external loads were prepared for the tests. Before the three-axial compression tests, the discontinuity surfaces were scanned and parameters describing the geometrical structure of these surfaces were determined. It has been shown that the roughness of the discontinuity walls causes a reduction in stiffness and strength. It has also been shown that with the increase of the confining pressure, the strength of the samples increases linearly, and the higher values of the angle at which the discontinuity is oriented corresponds to higher strength.
Abstract licence: CC BY
References5
5 more references, whose wording the paper’s licence keeps private.
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.