Skip to content
naulon
Not checkedNot checked for notices yet.

Static and Dynamic Analysis of Vibro Fluidized Bed Dryer using Finite Element Method

Eflita Yohana, Ismoyo Haryanto, Muhamad Adrian Dwiputra and 1 more

E3S Web of Conferences · 2018

doi:10.1051/e3sconf/20187305029 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Vibro Fluidized bed dryer is a widely used tea dryer now. Its function is to stop the enzymatic oxidation process and decrease water content up to 2,8-3,8%. The working principle is to use the vibrations generated by the eccentric motor so that the tea powder that runs on the bed will vibrate. The purpose of this research is to model, static and dynamic of vibro fluidized bed dryer. The analysis was to determine the maximum stress and natural frequency of the vibro fluidized bed dryer to the variation of green tea mass being processed. Using dynamic analysis the obtained first three natural frequencies of the vibro fluidized bed dryer were 5,8876 Hz, 9,5267 Hz, and 10,512 Hz. The results showed that at 695 kg tea mass the natural frequency has the same as the excitation frequency. In this case, the safety factor of the vibro fluidized bed dryer is 27.6. It can be concluded that the maximum capacity of the vibro fluidized bed dryer is 695 kg..

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.