Skip to content
naulon
Not checkedNot checked for notices yet.

One or more water demand patterns? - Calibration of the selected water network model

Kowalska Beata, Kowalski Dariusz, Suchorab Paweł and 1 more

E3S Web of Conferences · 2018

doi:10.1051/e3sconf/20185900020 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Calibration is one of the key steps in creating a numerical model of water supply networks. Calibration is performed on the basis of the results of the field measurement campaign and it should result in a consistent match of the simulation results with the results of the measurements. In the article the process and the results of the calibration of the selected water network model with the use a single (generalized) water demand pattern and using 11 patterns prepared for selected, characteristic consumers have been presented. Calibration was performed using the trial and error method in EPANET 2.0 and the optimization method in WaterGEMS.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.