Skip to content
naulon
Not checkedNot checked for notices yet.

The use of CeO2-Co3O4 oxides as a catalyst for the reduction of N2O emission

Rajska Maria, Wójtowicz Bartosz, Klita Łukasz and 2 more

E3S Web of Conferences · 2016

doi:10.1051/e3sconf/20161000130 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The morphological characterization of a series of cobalt-cerium oxide composites prepared by the deposition of CeO2 onto Co3O4 powder with a molar ratio of cerium oxide to Co3O4 in the range of 0 to 1 was performed. The powders were also impregnated with a solution of K2CO3 to obtain the theoretical content of potassium atoms 2at·nm−2. To investigate the effect of adding specific amount of CeO2 on the catalytic activity, the X-ray diffraction, SEM-EDX, laser particle size distribution and BET surface area measurements were used. The catalysts were tested through the low-temperature decomposition of nitrous oxide in the temperature range of 50°C to 700°C. The addition of CeO2 and K always moved the temperature of a complete N2O conversion towards lower temperatures (480°C-540°C to 340°C-420°C). The best catalytic properties were shown by the samples in which the ratio of cerium oxide to cobalt oxide ranged from 0.4 to 0.7.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.