Skip to content
naulon
Not checkedNot checked for notices yet.

Removal of Pb ion from water samples using red mud (bauxite ore processing waste)

Ghorbani A., Nazarfakhari M., Pourasad Y. and 1 more

E3S Web of Conferences · 2014

doi:10.1051/e3sconf/20130141019 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

This work presented the use of red mud (bauxite ore processing waste) in removal of lead ions in water samples. For this 0.1 g of red mud has been used as adsorbent which suspended in 10 ml of lead solution with the concentration of 50 mg l-1 for about 1 h. After that the lead concentration in the samples taken from the red mud treated lead solution measured with atomic absorption spectroscopy (AAS). The effect of some parameter which is important in adsorption of lead on red mud such as suitable adsorbent dosage, pH and contact time of solution and adsorbent was investigated. The result shows that red mud as solid waste and low-cost adsorbent can be successfully used for the removal of lead ion from aqueous solution.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.