Fully integrated wideband phased array with large scan range and 5:1 bandwidth

Abstract In this work, a fully integrated phased array using multi‐layer printed circuit board (PCB) fabrication technologies is presented. This array is directly fed by 50 Ω coaxial cables, without balanced‐to‐unbalanced transitions. An asymmetric dipole is used to achieve stable input impedance. Furthermore, to broaden the operating bandwidth, a coupling patch is designed beneath the asymmetric dipole, which also eliminates the common‐mode resonance and decreases the array profile. In addition, three wide‐angle impedance matching (WAIM) layers with different structures are utilised to improve the scan range in all scanning planes. Infinite array simulations indicate that the proposed array can operate over a 5.1:1 bandwidth (2.4 ∼ 12.2 GHz) with an active voltage standing wave ratio below 3 while scanning up to ± 60° in H plane and ±75° in the E plane. Furthermore, the proposed antenna, whose cross‐polarization levels remain below −35 and −7.5 dB when scanning up to 75° in the E plane and 60° in the D plane, demonstrates the merits of high polarization purity. Array simulations are verified by the measurements of a 12 × 12 prototype, and good agreement is observed.

Abstract licence: CC BY-ND

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.