Skip to content
naulon

Not checkedNot checked for notices yet.

Electrochemical micro-machining based on double feedback circuits

Lizhong Xu, Jipeng Wang, Chuanjun Zhao

Scientific Reports · 2023

doi:10.1038/s41598-022-25964-y (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Abstract Pulsed electrochemical micromachining accuracy predominantly depends on pulse duration. To obtain high accuracy, an expensive power source with ultra-short pulse duration is needed. An electrochemical micromachining method based on double feedback circuits is proposed in this work to achieve this aim. A positive feedback circuit plus a negative feedback circuit is used in the circuit of the pulsed electrochemical micromachining. Thus, the gains of the feedback circuits can control the pulse duration of the machining system. Experiments show that the machining resolution can be improved notably by an increase in the feedback gains. Using the method, one micro double cure beam is produced, and its accuracy gets to nanometer level under the condition of using an ordinary pulse duration power source.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.