Not checkedNot checked for notices yet.
Epitaxial growth of SiGe films by annealing Al–Ge alloyed pastes on Si substrate
Keisuke Fukuda, Satoru Miyamoto, Masahiro Nakahara and 6 more
Scientific Reports · 2022
doi:10.1038/s41598-022-19122-7 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Abstract A simple, low-cost, and non-vacuum epitaxial growth method to realize large-area semiconductors on crystalline silicon will become the game-changer for various applications. For example, we can expect the disruptive effect on the cost of large-scale III–V multi-junction solar cells if we could replace the high-cost germanium substrate with silicon–germanium (SiGe) on Si. For SiGe epitaxial growth, we attempted to develop a process using original Al–Ge pastes for screen printing and subsequent annealing. We compare two pastes including Al–Ge alloyed pastes with compositional uniformity in each particle and Al–Ge mixed pastes. We revealed that Al–Ge alloyed paste could form flatter SiGe film with much less residual pastes, supported by in-situ observations. The uniform and sufficient dissolution of the alloyed paste is responsible for these and led to higher average Ge-composition by annealing at 500 °C. The composition in SiGe was vertically graded up to ~ 90% at the topmost surface. These results show that printing and firing of Al–Ge alloyed paste on Si is the desirable, simple, and high-speed process for epitaxial growth of SiGe, which could be potentially used as the lattice-matched virtual substrate with III–V semiconductors.
Abstract licence: CC BY-NC-ND
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.