Skip to content
naulon

Not checkedNot checked for notices yet.

Amplified spontaneous emission from all-inorganic perovskite on a flexible substrate with silk fibroin

Chin-Yi Yang, Liang-Yu Jian, Yi-Ting Lee and 2 more

Scientific Reports · 2022

doi:10.1038/s41598-022-12313-2 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Abstract Stretchable microcavity lasers reveal potential application in flexible displays, biomedicine, and wearable devices in the near future. In this work, we investigated the characteristic of amplified spontaneous emission (ASE) from all inorganic CsPbBr3 QDs on a flexible PET substrate with the assistance of biocompatible silk fibroin (SF) film. In comparison with the sample on PET directly, the ASE of all-inorganic perovskite film revealed a lower threshold of 32.7 μJ/cm2, higher slope efficiency, and a larger gain coefficient of around 100.0 cm−1 owing to the better stack and good arrangement of the CsPbBr3 QDs on top of the SF film. For the temperature-dependent ASE measurement, the larger characteristic temperature of around 277 K is obtained from CsPbBr3 QD/SF film, and the emission peak reveals a slight shift with temperature variation, which indicates its temperature-insensitive property. As the curvature of flexible substrate increases under the mechanical bending, the lasing threshold of CsPbBr3 QD/SF film was reduced along with the increase in slope efficiency owing to the enhancement in the index guiding effect.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.