Not checkedNot checked for notices yet.
An ultrafast time-resolution method based on picosecond pulsed laser for determining rock fracture toughness at multipoint during the crack propagation
Mingyuan Zhang, Dejian Li, Liu Yang and 4 more
Scientific Reports · 2022
doi:10.1038/s41598-022-08428-1 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Abstract An innovative ultrafast time-resolution method based on a picosecond pulsed laser was employed to investigate the mode-I crack propagation characteristics of fractured rock. Its time resolution is as fast as the degree of 45 picoseconds. Then, a series of three-point compressive loading tests with this method were conducted on tuff semi-circular bend (SCB) specimens. Based on this method, we found that the mode-I fracture process of the tuff specimens were composed of repeated crack initiation, arrest, and re-initiation. In addition, the experimental results showed that the fracture rates of the tuff specimens in the initial 10 μs were 636 m/s, 663.9 m/s, and 578 m/s. In comparison, the fracture rates of the specimens were 11.19 m/s, 19.23 m/s, 26.79 m/s during the whole fracture process. As a typical heterogeneous material with primary defects, rock has different fracture toughness at different locations. Therefore, we proposed a new method for determining rock fracture toughness at multipoint during the crack propagation. This new method emphasizes the effect of fracture toughness on crack propagation, which enables to determine the fracture toughness at multipoint and is closer to the original definition of fracture toughness.
Abstract licence: CC BY-NC-ND
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.