Skip to content
naulon

Not checkedNot checked for notices yet.

Graphene/fluorescein dye-based sensor for detecting As(III) in drinking water

Madhu D. Sharma, Sadhana S. Rayalu, Spas D. Kolev and 1 more

Scientific Reports · 2021

doi:10.1038/s41598-021-96968-3 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Abstract A complex of reduced graphene oxide (rGO) and fluorescein (FL) dye nanoparticles of size between 50 and 100 nm has been prepared and its sensing performance for detection of As(III) in drinking water has been reported. When As(III) binds to the rGO–FL nanoparticles the relative quenching of fluorescence was increased with increase in As(III) concentration thus provide two linear calibration ranges (0–4.0 mmol L−1 and 4.0–10 mmol L−1). The fluorescence quenching mechanism was investigated by using time-resolved fluorescence spectroscopy and molecular modeling. The detection limit of this sensor has been determined as equal to 0.96 µg L−1 which is about 10 times lower than the WHO stipulated standard for As(III) in drinking water (10 µg L−1). The analytical performance and potential application of the nanosensor was compared to commercial field kits used in arsenic monitoring. The sensor proposed in this study is fast, sensitive and accurate for detection of As(III) in drinking water and environmental samples.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.