Skip to content
naulon

Not checkedNot checked for notices yet.

Entropy production and mixed convection within trapezoidal cavity having nanofluids and localised solid cylinder

Muhamad S. Ishak, Ammar I. Alsabery, Ishak Hashim and 1 more

Scientific Reports · 2021

doi:10.1038/s41598-021-94238-w (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Abstract The entropy production and mixed convection within a trapezoidal nanofluid-filled cavity having a localised solid cylinder is numerically examined using the finite element technique. The top horizontal surface moving at a uniform velocity is kept at a cold temperature, while the bottom horizontal surface is thermally activated. The remaining surfaces are maintained adiabatic. Water-based nanofluids ( $$\text {Al}_2\text {O}_3$$ Al 2 O 3 nanoparticles) are used in this study, and the Boussinesq approximation applies. The influence of the Reynolds number, Richardson number, nanoparticles volume fraction, dimensionless radius and location of the solid cylinder on the streamlines, isotherms and isentropic are examined. The results show that the solid cylinder’s size and location are significant control parameters for optimising the heat transfer and the Bejan number inside the trapezoidal cavity. Furthermore, the maximum average Nusselt numbers are obtained for high R values, where the average Nusselt number is increased by 30% when R is raised from 0 to 0.25.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.