Not checkedNot checked for notices yet.
Correlation between surface texture and internal defects in laser powder-bed fusion additive manufacturing
Makiko Yonehara, Chika Kato, Toshi-Taka Ikeshoji and 2 more
Scientific Reports · 2021
doi:10.1038/s41598-021-02240-z (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Abstract The availability of an in-situ monitoring and feedback control system during the implementation of metal additive manufacturing technology ensures that high-quality finished parts are manufactured. This study aims to investigate the correlation between the surface texture and internal defects or density of laser-beam powder-bed fusion (LB-PBF) parts. In this study, 120 cubic specimens were fabricated via application of the LB-PBF process to the IN 718 Ni alloy powder. The density and 35 areal surface-texture parameters of manufactured specimens were determined based on the ISO 25,178–2 standard. Using a statistical method, a strong correlation was observed between the areal surface-texture parameters and density or internal defects within specimens. In particular, the areal surface-texture parameters of reduced dale height, core height, root-mean-square height, and root-mean-square gradient demonstrate a strong correlation with specimen density. Therefore, in-situ monitoring of these areal surface-texture parameters can facilitate their use as control variables in the feedback system.
Abstract licence: CC BY-NC-ND
References46
40 more references, whose wording the paper’s licence keeps private.
All 46 referencesReads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.