Not checkedNot checked for notices yet.
Stochastic fracture of additively manufactured porous composites
Özgür Keleş, Eric H. Anderson, Jimmy Huynh and 3 more
Scientific Reports · 2018
doi:10.1038/s41598-018-33863-4 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Extrusion-based fused deposition modeling (FDM) introduces inter-bead pores into dense materials, which results in part-to-part mechanical property variations, i.e., low mechanical reliability. In addition, the internal structure of FDMed materials can be made porous intentionally to tailor mechanical properties, introduce functionality, reduce material consumption, or decrease production time. Despite these potential benefits, the effects of porosity on the mechanical reliability of FDMed composites are still unclear. Accordingly, we investigated the stochastic fracture of 241 FDMed short-carbon-fiber-reinforced-ABS with porosity ranging from 13 to 53 vol.% under tensile load. Weibull analysis was performed to quantify the variations in mechanical properties. We observed an increase in Weibull modulus of fracture/tensile strength for porosity higher than ~40 vol.% and a decrease in Weibull modulus of fracture strain for an increase in porosity from 25 to 53 vol.%. Micromechanics-based 2D simulations indicated that the mechanical reliability of FDMed composites depends on variations in bead strength and elastic modulus of beads. The change in raster orientation from 45°/−45° to 0° more than doubled the Weibull modulus. We identified five different types of pores via high-resolution X-ray computed tomography. A 22% and 48% decrease in carbon fiber length due to extrusion was revealed for two different regions of the filament.
Abstract licence: CC BY-NC-ND
References52
- 40.
39 more references, whose wording the paper’s licence keeps private.
All 52 referencesReads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.