Skip to content
naulon
Not checkedNot checked for notices yet.

An Aqueous-Based Approach for Fabrication of PVDF/MWCNT Porous Composites

Hossein Rezvantalab, Nastaran Ghazi, Matthew J. Ambrusch and 2 more

Scientific Reports · 2017

doi:10.1038/s41598-017-01770-9 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Abstract In this paper, we demonstrate the fabrication of conductive porous polymers based on foaming of an aqueous dispersion of polymeric particles and multi-walled carbon nanotubes (CNT). By tuning the surface energy of the constituents, we direct their preferential adsorption at the air-liquid (bubble) interface or within the liquid film between the bubbles. Sintering this bi-constituent foam yields solid closed-cell porous structure which can be electrically conductive if CNT are able to form a conductive path. We measure transport (electrical and thermal), mechanical, and morphological properties of such porous structures as a function of CNT loading and the method used for their surface functionalization. For a fixed polymer volume fraction, we demonstrate the limit in which increasing CNT results in decreasing the mechanical strength of the sample due to lack of adequate polymer-CNT bond. Such lightweight conductive porous composites are considered in applications including EMI shielding, electrostatic discharge protection, and electrets.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.