Skip to content
naulon

Not checkedNot checked for notices yet.

An additively manufactured magnesium-aluminium alloy withstands seawater corrosion

Zhuoran Zeng, Sanjay Choudhary, Marco Esmaily and 6 more

npj Materials Degradation · 2022

doi:10.1038/s41529-022-00241-5 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Abstract Magnesium, the lightest structural metal, has inherently poor corrosion resistance. In this study, we developed a magnesium-aluminium Mg-10.6Al-0.6Zn-0.3Mn alloy, additively manufactured by laser powder bed fusion. We reveal that this alloy has a record low degradation rate amongst all magnesium alloys in practically relevant corrosive solutions, and it even withstands seawater corrosion. As tested by a number of methods, the alloy shows even more enhanced passivation with longer immersion periods. The alloy surface following immersion maintained a nearly corrosion-free appearance and was determined to have a thin aluminium-containing surface film, due to surface enrichment of aluminium from the supersaturated matrix. Aluminium enrichment near the sample surface was also observed when the sample is immersed in phosphoric acid or exposed to atmosphere at room temperature. This study demonstrates the prospects for additively manufactured ultra-lightweight magnesium structure with outstanding corrosion resistance.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.