Skip to content
naulon
Not checkedNot checked for notices yet.

High-performance, flexible thermoelectric generator based on bulk materials

Qian Xu, Biao Deng, Lenan Zhang and 11 more

Cell Reports Physical Science · 2022

doi:10.1016/j.xcrp.2022.100780 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Summary: Flexible thermoelectric generators (f-TEGs) are promising solutions to power supply for wearable devices. However, the high fabrication costs and low output power density of conventional f-TEGs limit their applications. Here, we present a bulk-material-based f-TEG featuring multifunctional copper electrodes for heat concentration and dissipation and fabrics for comfort and heat-leakage reduction. When worn on the forehead, our f-TEG’s maximum output power density (based on the device’s area) reaches 48 μW/cm2 at a wind speed of 2 m/s and an ambient temperature of 15°C. A light-emitting diode (LED) powered by our f-TEG headband with 100 pairs of thermoelectric pillars can illuminate a paper for reading in a dark room at 17.5°C without an external heat sink or forced convection at the cold side. This work provides a general design approach for high-performance f-TEGs at a low cost. The device-level perspectives fill the critical knowledge gap between state-of-the-art material innovations and practical thermoelectric applications.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.