Skip to content
naulon
Not checkedNot checked for notices yet.

1-mW Vibration Energy Harvester Based on a Cantilever with Printed Polymer Multilayers

Nicolas Godard, Lucas Allirol, Antoine Latour and 5 more

Cell Reports Physical Science · 2020

doi:10.1016/j.xcrp.2020.100068 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Summary: Energy harvesters are required for autonomous sensors. The field is still missing a low-cost technology that would provide enough power for tangible low-frequency use cases, although triboelectric nanogenerators (TENG) have emerged as a new energy technology. Standard vibration energy harvesters (VEHs) are based either on bulky electromagnetic systems or stiff lead-based piezo-ceramics. Those systems are rarely compatible with large deformations that occur at low frequency such as body movements. Here, we show that a stack of 10 thin layers of poly(vinylidene fluoride trifluoroethylene) screen printed on a polymer substrate can harvest up to 0.97 mW at 33 Hz with an area of only 2.4 cm2. These results are obtained with a lead-free, cost-effective, and scalable technique at 150°C, competing with TENG solutions. This VEH can work for at least 107 cycles while harvesting sufficient energy to feed a microcontroller that communicate wirelessly with a mobile phone.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.