Skip to content
naulon
Not checkedNot checked for notices yet.

Ultrasound-assisted fast encapsulation of metal microparticles in SiO2 via an interface-confined sol-gel method

Youwen Tian, Wei Luo, Yedan Wang and 5 more

Ultrasonics Sonochemistry · 2021

doi:10.1016/j.ultsonch.2021.105484 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Although the traditional Stoˇber process-based methods are widely used for encapsulation of metal nanoparticles in SiO2, these time-consuming methods are not effective for coating metal microparticles with a uniform SiO2 layer of desired thickness. Herein, an ultrasound-assisted, interface-confined sol–gel method is proposed for fast encapsulation of metal microparticles in SiO2, and the encapsulation of Sn microparticles is chosen as an example to illustrate its feasibility. The proposed method involves covering metal microparticles with liquid films that contain water, alcohol, surfactant (Span-80) and catalyst (NH4F) and then ultrasonically dispersing these particles into cyclohexane, where tetraethylorthosilicate (TEOS) is added. To ensure the hydrolysis-condensation reactions of TEOS occurring at the particle-cyclohexane interface so that the formed SiO2 is coated on the particles, the microparticles should be well dispersed into cyclohexane with the liquid films being not broken away from their surfaces. It is found that the assistance of probe sonication and the addition of surfactant are crucial to achievement of a good dispersion of metal microparticles in cyclohexane. And using high-viscosity alcohol (namely glycerol), controlling the volume ratio of water to alcohol and the amount of water, and choosing a suitable ultrasonic power are essential for preventing the formation of free SiO2 (namely SiO2 that is not coated on the particles), which is a result that the liquid films escape from the particle surfaces under ultrasonic cavitation. Our results have also revealed that the thickness of SiO2 layer can be adjusted by changing the reaction time or the total amount of water. In particular, the thickness of SiO2 layer can be easily raised by simply repeating the encapsulation procedure. Compared with the traditional Stoˇber process-based methods, the proposed method is time-saving (reaction time: about 30 min vs. more than 12 h) and extremely effective for coating microparticles with a continuous, uniform SiO2 layer of desired thickness.

Abstract licence: CC BY-NC-ND

References20

    20 more references, whose wording the paper’s licence keeps private.

    Reads

    Read by people on this page

    None yet.

    Checked or read by AI through naulon

    None yet.

    A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

    Are you an author?

    Is this your paper?

    Claim it to add your note and be paid when agents cite it. Free.