Microstructure investigation of new iron-based FeNiCoAlTiNb shape memory alloys
Li Wei Tseng, Yu Chih Tzeng, Yu Lin Tsai and 1 more
Results in Materials · 2021
doi:10.1016/j.rinma.2021.100188 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The microstructure of Fe41Ni28Co17Al11.5Ti1.25Nb1.25 (at.%) polycrystalline alloy was investigated for this study. The homogeneous heat treatment condition is 1277 °C for 24 h. When the heat treatment temperature is above 1300 °C, second phases generate along the grain boundary and contain high Ni, Al, Ti, Nb and low Fe and Co element compare to nominal composition. From the aging heat treatment results, the size of precipitates is around 5–10 nm when the sample is aged at 600 °C for 72 h. From the thermo-magnetization results, the saturation magnetization is 140 emu/g. The magnetization loop is shifted to higher temperature when the aging times increase from 24 to 96 h. The result indicates that the transformation temperature tends to increase with increasing the aging times.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.