Skip to content
naulon
Not checkedNot checked for notices yet.

MIMO Radar testbed based on USRP N320/321 software-defined radios

Robert Gilpin, Joey Bray, Mostafa Hefnawi

e-Prime: Advances in Electrical Engineering, Electronics and Energy · 2022

doi:10.1016/j.prime.2022.100082 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

In a conventional phased array radar system (PAR), a transmit beam is slowly steered through a sector to illuminate targets sequentially, leaving the radar blind to threats when the transmit beam is pointed in other directions. On the other, multiple input, multiple output (MIMO) radar systems transmit orthogonal waveforms from each antenna element to illuminate the entire field of view (FOV) of the radar simultaneously, providing uninterrupted situational awareness. However, MIMO radar systems are more challenging to implement because of the added orthogonality requirements between its channels and the drastic increase in the required digital signal processing. This paper uses commercially-available cutting-edge software-defined radios (SDRs) to build a reconfigurable 8 × 8 MIMO radar with a 64-element virtual array operating in C-band (NATO G-band). Measurements indicate that the radar can detect and localize multiple targets in all 3-dimensions, including bearing, range, and Doppler, with an angular resolution of 5.5 and a range resolution of 0.9 m. The MIMO radar operates in real-time with a refresh rate of only 3 s and can switch between TDM and CDM multiplexing modes.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.